• 276 Answers SOURCE: Sounds strange, since I don't think that the HQ5 heads in the shaver have the pointy parts that other shaver heads have. If your comb has 2 pointy edges, make sure they are located correctly in the head housing - they will need to be located inwards, with the the spindle that the retaining bracket attaches to in the center of the the two pointy parts. But apart from placing the combs in first, locating the cutters in then putting the retaining bracket in (which may be broken if it won't fasten properly) I'm not sure what you can do, other than calling your local Philips Service Centre, Posted on Apr 08, 2009. You mean the knob is connected directly to the blades?

Home >Electric Shaver Parts >Norelco Philips Electric Shaver Parts >Norelco Beard Trimmer & Hair Clipper Parts. T-7000, T-7500, T-1000, T. Norelco part.

I'm not sure what you mean by blade knob, but does turning it turn the blades? If so, I'd suggest wedging something between the front grill and the blade to prevent it spinning and try to twist the knob off.

I tried to find a owner's manual for your fan, with the assumption that there would be assembly instructions, but was unable to find one. Do you still have the owner's manual? And if so, are there any assembly instructions in there? How did the back grill come off, if you can't get it over the knob?

Or are you assembling it for the first time. If you are assembling it for the first time, was the knob there when you got it?

That seems poor design if so. Sep 03, 2007 . Instruction to assemble a clipper blade. Youda Mystery The Stanwick Legacy Walkthrough there. Above picture Socket Spring Tension Place Socket on Spring Tension like this Slide Socket back as shown in picture Turn Socket & Spring Tension over Make sure Socket is slide back This is Call a Blade Guide Make sure the blade Guide is on the Spring Tension Make sure blade guide is on like picture above, Now place Socket & Spring aside The comb Blade Place comb blade as picture above Place cutter blade as picture above, making sure cutter blade smaller blade is on the comb blade Rail. Hold the blade like this Finger on top and Thumb on the bottom Turn blade over like this while still holding the blade together Place screw as shown Screw in the screw don't tighten leave loose. Now that you have the 2 screw in and not tight place the blade like this You need to hold the blade with one hand and with your Philips screw driver tap the cutter blade back lightly until the cutter teeth are 2/32 back from the comb blade. The cutter blade which is the smaller blade is back 2/32 from the comb blade which is the bigger blade.

When this is done by holding the blade together with your finger & Thumb Tighten the 2 screws tight Your blade should look like this when done correctly We hope this was helpful when assembling a clipper blade. May 11, 2011 . I had the same problem and I eventually figured it out. The blade assembly has to be reassembled first then snapped back into place. The bottom part has a little 'nub' that the screws attach to 2. Nokia 5130 Call Blacklist Software. The second part is the thin piece of metal with a ridge 3. The white plastic thing, make sure the ridges are sandwiched together 4.

The small blade, the blades must face each other 5. The large blade use the 2 screws to hold the assembly together, once assembled it snaps into place on the clipper. See attached picture for how it should look once assembled. Download Dbartisan 8.7.4 Crack. It's STUPID that this is missing from the instruction guide that comes with the clippers. Mar 15, 2010 . I have had my Bosch Universal Mixer with the Blender and Food Processor Attachments since 2005, and I've loved it since the day I got it. That is, until the blender broke while my son was crushing ice to make slushies.