Mutate The Lab Rat 2 Hacked Arcadeprehacks Age there. EN 4 Introduction Your Blade® SR is the absolute best way to transition from fl ying a coaxial heli to a single-rotor CCPM machine with confi dence and, most. E-flite has been a staple in the electric market for sometime. When the Blade line of helicopters were.

• © 2010 Horizon Hobby, Inc. ® 4105 Fieldstone Road Champaign, IL 61822 Specifications Horizon Hobby UK Units 1-4 Ployters Rd Staple Tye Length. 19.10 in (485mm) Harlow, Essex Height. • Table of Contents Introduction Your Blade SR is the absolute best way to transition from flying a coaxial heli to a single-rotor CCPM machine with ® Specifications....1 confidence and, most importantly, success. It comes out of the box programmed to provide softer climb, pitch and roll Introduction....3 response around the center of stick movement. • Not Available Separately.Blade SR RTF Airframe EFLH1057.HP6DSM 6-Channel Transmitter, 2.4GHz DSM2: BSR • Removeandinspectcontents.

• Battery Warnings and Guidelines • Intheeventofacrash,youmustquicklyandsafelydisconnectandremovethebatteryfromthemodel,then place it in a safe, open area away from flammable materials to observe it for at least 15 minutes. The 3S 11.1V 1000mAh Lithium Polymer Battery Pack (EFLB0997) included with your Blade SR features Charge Protection Circuitry and Balance Charging via the included 3S 11.1V Lithium Polymer Balancing • Storethebatteryatroomtemperatureatapproximately½charge(3.8Vpercell;11.4Vfora3Sbattery Charger (EFLC3105). • Battery Charging Input power for the charger can also be supplied from a small 12-volt gel cell or car battery. It is important that you only charge the included 3S 11.1V 1000mAh Li-Po Battery Pack (EFLB0997) with the included 3S11.1VLi-PoBalancingCharger(EFLC3105).YourbatterypackisequippedwithspecialChargeProtectionCircuitry and a Balance Charge Lead with connector that is only compatible with this charger. Alphabet Tifinagh Pdf.

• Charge Errors and Indications Installing the Flight Battery In the event that both the red and green LEDs flash, a charge error has occurred. Some examples of charge errors and Use the included hook and loop material for mounting the Li-Po battery pack. We suggest installing the loop (fuzzy) their indications include: material on the battery pack and the hook material on the battery support. • Center of Gravity Transmitter Control Identification Once you have properly installed and secured the battery, check the helicopter’s center of gravity. With the canopy Note: Before each flight ALWAYS turn the transmitter on before connecting the flight battery to the 2-in-1 unit. Installed, lift the helicopter by the flybar with the flybar positioned perpendicular to the tail boom.